Products:
Asphalt Road Milling Machine
XM130 asphalt road milling machine is an asphalt concrete road maintenance machine applied for renovating asphalt pavement on large-scale highways, urban roads, airports, freight yard, etc. It could also be used for thorough removal of entire concrete overlay, and cleaning protuberance, oil layers, reticulation and vehicle tracks. In addition, road trench and tunnel excavation, cement road surface roughening and dislocation smoothening could also be carried out by this asphalt road milling machine. With features like high efficiency, simple operation, easy control of milling depth, waste material recycling, and good maneuverability, XM130 asphalt road milling machine is an ideal construction machine for pavement maintenance and renovation.
Characteristics of XM130 Asphalt Road Milling Machine
Structure
XM130 cold milling machine adopts the structure of front axle driving and mechanical driving mill drum.
Travel System
This asphalt road milling machine adopts stepless shift for the hydraulic and mechanical drive system. The high speed and low speed can satisfy different request of devolving and milling.
Power Transmission
Power transit from pump, motor, reduction gear, and driving axle.
Appending System
Freely float front-wheel, independently support rear-wheel. Right rear-wheel can swing inward that is easy to mill the brim.
Milling System
Mechanical drive mode, high efficiency, import milling cutting of long using life are all available with this asphalt road milling machine.
The driving route is from engine, to stretch shaft coupling, clutch, transmission, chain wheel box and milling drum.
Controlling System of Milling Depth
The control of milling depth of this asphalt road milling machine is achieved by adjusting the height of left or right support legs. The assignment ruler on the back supporting leg displays the milling depth. Automatic leveling unit can be installed to this system.
Turning System
It adopts hydraulic turning system and has flexible operation.
Cooling System
This machine is equipped with a fan-shaped muzzle, which jet water to the milling cutting, cooling the milling cutter and lessening the dust. The bulky water-box allows it to work incessantly. Electric water pump, high-pressure insufflation, take-down and clear the muzzle easily.
Brake
The brake system of this asphalt road milling machine consists of traveling brake and parking brake.
Lighting System
It is equipped with illumination lamp for nightwork.
Steering Pedestal and Instrument Board
The position of the chair can be adjusted back and forth so that the operator can step freely on the roomy maneuvering platform. It is comfortable to manipulate the instrument and the control handle.
Transportation Security
XM130 asphalt road milling machine has several pick-up points that have function of crane or convey.
Technique Training
Operator training that lasts about 2 weeks is available on the scene or on the factory. The trainings include operating, debugging, maintenance, hydraulic theory, electric theory, structure introduce, construction method, safety precautions and so on.
Top 
Specifications of XM130 Asphalt Road Milling Machine
Engine
| Model Item | XM130 |
| Manufacturer | Shanghai Diesel Engine Co., Ltd. |
| Type | C6121ZLG |
| Cooling mode | Water-cooling |
| Cylinder quantity | 6 |
| Rated power | 190kw/255hp |
| Rated speed | 2200rpm |
| Oil-consuming | ≤255g/kwh |
| Noises | ≤90dB(A) |
| Milled depth and width | Milled depth | 0~315mm |
| Milled width | 1320 mm | |
| Max. travel speed | 0~7 km/h | |
| Max. milled travel speed | 33m/min | |
| Min. turning radius(mm) | 7000 mm | |
| Milled drum tools | 112 | |
| Drum diameter | 980 m | |
| Travel mode | 4×2 | |
| Twill mode | Roughening and dislocation smoothness | |
| Measurement | ||
| XM130 | length × width × height | |
| Machine | 5255×2480×3245 (mm) | |
| Conveyor | 7020×1030×1040 (mm) | |
Top XM130 Technical Specifications
| Specification Item | XM130 | |
| Max. milled width | 1320 mm | |
| Max. milled depth | 315 mm | |
| Milled drum tools | 112 | |
| Engine | type | C6121 |
| Rated power | 190kw/255hp | |
| Rated speed | 2200rpm | |
| Oil-consuming | ≤255g/kwh | |
| Operating speed | 0~33m/min | |
| Travel speed | 0~7km/h | |
| Max. gradeability | ≥20% | |
| Min. ground clearance | 320mm | |
| Min. turning radium | 7m | |
| Operation weight | 20000kg | |
| Fuel tank | 280 (l) | |
| Hydraulic oil tank | 160 (l) | |
| Water tank | 7850 (l) | |
| Electric system | 24V | |
| Machine (length × width × height | 5255×2480×3245 (mm) | |
| Conveyor (length × width × height) | 7020×1030×1040 (mm) | |
Top XM130 Standard Configuration
| No | Name | Manufacturer | ||
| 1 | Engine | Shanghai Diesel Engine | ||
| 2 | Hydraulic system | SAUER | ||
| 3 | Transmission system | Stretch shaft coupling | CENTA | |
| Transmission | Hangzhou Advance Gearbox Co., Ltd. or Xi'an Heavy Machinery Research Institute | |||
| Chain wheel box | Xuzhou Road Construction Machinery Co. Ltd. | |||
| 4 | Milling cutter | KENNAMETAL | ||
| 5 | Travel systems | Working box | Hangzhou Advance Gearbox Co., Ltd. or Xi'an Heavy Machinery Research Institute | |
| Drive axle | Xuzhou Meriter Axle Co., Ltd. | |||
| 6 | Tyres | EUERPADS Co., Ltd. | ||
| 7 | Conveyor | EUERPADS Co., Ltd. | ||
Shanglong International is a China construction equipment supplier who works with several top construction equipment manufacturers to supply complete range of asphalt road milling machines, concrete mixer trucks, wheel loaders, excavators, bulldozers, etc. In addition to asphalt road milling machines, we also supply trucks like dump trucks, tractor trucks, cargo trucks and special vehicles like water tank truck, semi trailers, garbage trucks as well as cranes. These products are of high quality and low price, making them popular in countries like Russia, Iran, Saudi Arabia, Algeria, Peru, Brazil, Chile, etc. Thank you for visiting our website. Please keep browsing or contact us directly for more information!
